Ubiquiti air control 2 mac os#

Reset The Reset button serves two functions for the UniFi AP: (This is described further in the Mounting Bracket section.)Įthernet This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. Locking Notch The Locking Notch will be used with the Mounting Bracket to help secure the UniFi AP. Steady Blue with Occasional Flashing Indicates the device is in an isolated state (all WLANs are brought down until an uplink is found). It will also display the location of the AP on the map. When you click Locate in the UniFi Controller software, the LED on the AP will flash. Quickly Flashing Blue This is used to locate an AR Blue Indicates the device has been successfully adopted by a network and is working properly. This usually indicates that a process such as a firmware upgrade is taking place. White/Blue Device is busy do not touch or unplug it. For setup details, see the User Guide on the website: Hardware Overview LED LED Color Status White Factory default, waiting to be adopted. A UniFi Cloud Key or management station running the UniFi Controller software, located either on-site and connected to the same Layer-2 network, or off-site in the cloud or a NOCĪll UniFi devices support off-site management controllers.A DHCP-enabled network (for the AP to obtain an IP address as well as for the wireless clients after deployment).UniFi Controller software v5.7 or higher (available at: Network Topology Requirements.Web Browser: Google Chrome (Other browsers may have limited functionality.).Java Runtime Environment 1.8 (or above).

Ubiquiti air control 2 mac os#

Microsoft Windows 7/8/10, Mac OS X, or Linux.

Optional: Drywall or keyhole saw (to cut 18 mm hole for Ethernet cable feed) System Requirements.

Drill and drill bit (6 mm for wall-mounting or 3 mm for ceiling-mounting).